128	PANASCSI Version 1.64
129	Panasonic SCSI (KV-SS Series)
130	Copyright © 1991-1997 Pixel Translations, Incorporated
150	Panasonic KV-SS50 w/SCSI
151	Panasonic KV-SS55 w/SCSI
152	Panasonic KV-SS60N w/SCSI
153	Panasonic KV-SS65N w/SCSI
154	Panasonic KV-SS25 w/SCSI
155	Panasonic KV-SS50EX w/SCSI
156	Panasonic KV-SS55EX w/SCSI
157	Panasonic KV-SS60EX w/SCSI
158	Panasonic KV-SS65EX w/SCSI
4700	None
4701	Bayer Dither 64
4702	Bayer Dither 16
4703	45 deg. Halftone
4704	0 deg. Halftone
4705	Error Diffusion
4706	User Downloaded
4720	None
4721	Low
4722	Medium
4723	High
4724	Smooth
4730	Default Paper Size:
4731	Letter - 8.5 x 11 in
4732	Legal - 8.5 x 14 in
4733	Double Letter - 11 x 17 in
4734	A3 - 297 x 420 mm
4735	A4 - 210 x 297 mm
4736	A5 - 148 x 210 mm
4737	A6 - 105 x 148 mm
4738	B4 (ISO) - 250 x 353 mm
4739	B4 (JIS) - 257 x 364 mm
4740	B5 (ISO) - 176 x 250 mm
4741	B5 (JIS) - 182 x 257 mm
4742	B6 (ISO) - 125 x 176 mm
4743	B6 (JIS) - 128 x 182 mm
4744	Scanner's Maximum
4745	Business Card - 55 x 91 mm
4750	The Barcode dialog allows you to set 5 different regions in order to search for 5 different barcodes.\n
4751	The XPosition, YPosition, Imagewidth and Imagelength allow you to specify a region on the page.\n
4752	The scanner searches for a barcode within the specified region.
4753	You also need to specify which kind of barcode to search for. 
4754	The scanner searches for only that particular kind of barcde.
4755	You can specify up to 5 different regions (with the corresponding barcode type) to search for per side of the page
4756	If the scanner is a duplex scanner, you can specify the same number of regions for the backside
4757	The Auto Read Front Side and Auto Read Back Side enable you to switch either side completely on or off.
4758	If the Enable Barcode checkbox is not checked, the scanner doesn't search for a barcode at all.
4760	Activating page size detection will ignore any information stored in the page size or area fields.\n\nThe Dither and Gamma buttons offer a file selection for downloading stored data to the scanner.
4761	Please select front main scan region to change Panasonic special features.
4762	Please select front main scan region to change Panasonic special features.
4763	Not enough DOS memory (GlobalDOSAlloc failed).
4764	Scanner lamp is bad.
4765	SCSI Parity error.
4766	The scanner's power was cycled. Try operation again.
4767	Internal hardware fault in scanner.
4768	External hardware fault in scanner.
4769	Aborted SCSI command (unspecified error).
4780	SCSI Parameter list length error.
4781	Invalid SCSI Command code.
4782	Invalid field in SCSI Command Descriptor Block (CDB).
4783	Unsupported Logical Unit Number (LUN).
4784	Invalid field in SCSI parameter block.
4785	SCSI Command Sequencing error.
4786	Too many windows defined.
4787	Invalid combination of dithers in windows and subwindows.  Please see documentation or contact your vendor for valid combinations.
4788	Batch Abort error.
4789	Invalid bits in IDENTIFY message.
4790	This scanner does not support scanning images that large.  Reduce resolution or image size and try again.
4791	This scanner can not scan duplex.
4797	The numbering unit cover is open.
4798	The lamp of the scanner is open.
4799	Paper is jammed in scanner
4800	Paper is jammed in scanner
4801	Paper is jammed in scanner
4802	Paper is jammed in scanner
4803	Deskew Error
4804	Minimum Media Error
4805	Media Length Error
4806	Double feed has occurred
4807	Barcode Error
4808	Endorsing Unit is not available
4809	Error in pointer position
4810	Endorser string is invalid
4811	Can not print Endorser because length of page being scanned is too short.
4814	The type of barcode chosen is not supported by this scanner.
4815	No Dither file has been downloaded to the scanner.
4900	None
4901	 1 * 1 Matrix
4902	 2 * 2 Matrix
4903	 3 * 3 Matrix
4904	 4 * 4 Matrix
4905	 5 * 5 Matrix
4910	Auto mode 1
4911	Auto mode 2
4912	Auto mode 3
4920	Normal
4921	User Download 0
4922	User Download 1
4923	User Download 2
4924	User Download 3
4925	User Download 4
4926	Gamma for CRT
4930	No Gamma File has been downloaded to the scanner.
4931	None
4932	Detect and Scan Control Sheet, Continue Scanning
4935	Front #%d
4936	Back #%d
4940	Deskew Off
4941	Deskew Page
4942	Detect deskew parameters but don't deskew page
4945	Enabling the endorser will cause a string to be printed on every page.
4946	The text is printed on the backside of the page.
4947	The Endorser String Field specifies the text that is printed on the paper.
4948	TO PRINT AN INCREMENTING NUMBER:
4949	The first # character encountered in the string is replaced with the value specifed in the "Starting Number" field. Every successive # character is printed as a #. 
4950	The starting number that replaces the # character is incremented a particular amount for every successive page. This amount is specified in the "Step Number"
4951	field. The number field always takes up 7 spaces.
4952	TO PRINT THE DATE:
4953	If a "%1d" or "%2d" or "%3d" or "%4d" is encountered in the string, it is replaced with the current date. The format in which the date is printed is determined by the number after the % sign: 
4954	%1d: YY/MM/DD\n%2d: YYYY/MM/DD\n%3d: MM/DD/YY\n%4d: DD Abbreviated Month, YYYY
4955	For example: %4d will be replaced with 21 Dec., 1997
4956	TO PRINT THE TIME:
4957	If a "%1t" or "%2t" is encountered, it is replaced with the current time. The format in which the time is printed is determined by the number after the % sign:
4958	%1t: HH:MM\n%2t:  HH:MM:SS
4959	Note: In order to print a % sign, use two % characters.
4960	VERTICAL OFFSET\nThe "Printing Offset" field's value determines the distance from the top of the page where the string is printed. A value of 1 is equivalent to 2.40 mm. An offset of 10mm is always added to the value.
4961	For example, a value of 5 = 10mm + 5 * 2.40mm = 22mm
4962	EXAMPLE:\n If the String field is "Bio Exam # - %3d, LSR University"\nStart field is 3\nStep field is 2
4963	String printed on the back of Page 1: "Bio Exam       3 - 12/21/97, LSR University" 
4964	String printed on the back of Page 2: "Bio Exam       5 - 12/21/97, LSR University" and so on.
4970	No Barcode
4971	CODE 39
4972	CODE 2/5 interleaved
4973	Codabar
6097	00010128
6098	00000401
60723	Range should be between %ld and %ld.
60724	Invalid Range